1 Getting Started
34 Keysight U1253B User’s and Service Guide
4
scrolls through the measurement function(s)
of the present rotary switch selection.
– enters the Setup mode.
– In the Setup mode, press or to navigate through the
menu pages. Press or to scroll through the available
settings.
– Press to edit the specified value.
– Press again to save the new settings and exit the
editing mode, or press to exit without saving.
– Press for more than 1 second to exit this mode.
5
scrolls through the available measurement
ranges (except when the rotary switch is at the
or position)
[b]
.
enters the Auto Range mode.
6
scrolls through the available
dual-combination displays (except when the rotary
switch is at the , or position, or
when the multimeter is in 1 ms Peak Hold or
Dynamic Recording mode)
[c]
.
exits Hold, Null, Dynamic Recording, 1 ms Peak Hold,
and dual display modes.
Table 1-2 Keypad descriptions and functions (continued)
Button Function when pressed for less than 1 second Function when pressed for more than 1 second
To Next Page
Loading...
