Keysight Technologies U1253B - Figure 4-14 Power-On Backlight Setup; Setting Power-On Backlight Brightness Level

4 Changing the Default Settings
128 Keysight U1253B User’s and Service Guide
Setting power-on backlight brightness level
The brightness level that is displayed when the multimeter turns on can be set to
HIGH, MEDIUM, or LOW.
Figure 4-14 Power-on backlight setup
While using the multimeter, you may adjust the brightness at any time by pressing
the button.
Press Hz
to edit
Press or
to configure
Press Hz to save
and exit
or press Esc
to exit without saving
Press or
to configure