Functions and Features 3
Keysight U1253B User’s and Service Guide 97
Data Logging
The data logging function provides the convenience of recording test data for
future review or analysis. Since data is stored in nonvolatile memory, the data
remains saved when the multimeter is turned OFF or the battery is changed.
The two options offered are manual (hand) logging and interval (time) logging
functions, which is determined in the Setup mode.
Data logging records the values on the primary display only.
Manual logging
Firstly, ensure that manual (hand) logging is specified in Setup mode.
1 Press for more than 1 second to store the present value and function on
the primary display to the non-volatile memory. The and the logging
index will be displayed for 3 seconds.
2 Press and hold again for the next value that you would like to save into
the memory.
To Next Page
Loading...
