Keysight Technologies U1253B - Figure 4-20 Echo Mode Setup for Remote Control; Setting Echo Mode

Changing the Default Settings 4
Keysight U1253B User’s and Service Guide 133
Setting echo mode
– Turning echo mode to “ON” enables the transmitted characters to be echoed
on the PC in remote communication.
– This is useful when developing PC programs which use SCPI commands. It is
recommended that you disable this function during normal operation.
Figure 4-20 Echo mode setup for remote control
to switch between
OFF and ON
Press Hz
to edit
Press or
Press Hz to save
and exit
or press Esc
to exit without saving