Keysight Technologies U1253B - Figure 3-3 Refresh Hold Mode Operation

Functions and Features 3
Keysight U1253B User’s and Service Guide 89
Figure 3-3 Refresh hold mode operation
Press
Hold
Press
Shift
Variation count
> setting
Updated
Reading
(“R” flashes)
NOTE
– For voltage and current measurements, the held value will not be updated if
the reading is below 500 counts.
– For resistance and diode measurements, the held value will not be updated if
the reading is “OL” (open state).
– For all types of measurement, the held value will not be updated until the
reading has reached a stable state.