Keysight Technologies U1253B - Figure 4-11 Minimum Frequency Setup; Setting Minimum Measurable Frequency

4 Changing the Default Settings
124 Keysight U1253B User’s and Service Guide
Setting minimum measurable frequency
The setup for minimum measurable frequency will influence the measurement
rates for frequency, duty cycle, and pulse width. The typical measurement rate as
defined in the specification is based on a minimum measurable frequency of 1 Hz.
Figure 4-11 Minimum frequency setup
to choose the value
to choose the value
Press Hz
to edit
Press or
Press or
Press Hz to save
and exit
or press Esc
to exit without saving
to choose the value
Press or