1 Getting Started
22 Keysight U1253B User’s and Service Guide
Introducing the Keysight U1253B True RMS OLED Multimeter
The key features of the true RMS OLED multimeter are:
– DC, AC and AC+DC voltage and current measurements.
– True RMS measurement for both AC voltage and current.
– Rechargeable Ni-MH battery with built-in charging capability.
– Ambient temperature readout that accompanies most measurement readouts
(both in single and dual display modes).
– Battery capacity indicator.
– Bright yellow OLED (Organic Light Emitting Diode) display.
– Resistance measurement up to 500 MΩ.
– Conductance measurement from 0.01 nS (100 GΩ) to 500 nS.
– Capacitance measurement up to 100 mF.
– Frequency counter up to 20 MHz.
– Percentage scale readout for 4–20 mA to 0–20 mA measurement.
– Measurement of dBm with selectable reference impedance.
– 1 ms peak hold to catch in-rush voltage and current easily.
– Temperature test with selectable 0
°C compensation (without ambient
temperature compensation).
– J-type or K-type probe for temperature measurement.
– Frequency, duty cycle, and pulse width measurements.
– Dynamic recording for minimum, maximum, average, and present readings.
– Data hold with manual or auto trigger and relative modes.
– Diode and audible continuity tests.
– Square wave generator with selectable frequency, pulse width, and duty cycle.
– Keysight GUI Application Software (IR-USB cable sold separately).
– Closed case calibration.
– 50,000-count precision true RMS digital multimeter, designed to meet EN/IEC
61010-1:2001 Category III 1000 V/ Category IV 600 V, Pollution Degree 2
standards.
To Next Page
Loading...
