Keysight Technologies U1253B - Default Factory Settings and Available Setting Options; Table 4-1 Default Factory Settings and Available Setting Options for each Feature

Changing the Default Settings 4
Keysight U1253B User’s and Service Guide 111
Default Factory Settings and Available Setting Options
The following table shows the various menu items with their respective default
settings and available options.
Table 4-1 Default factory settings and available setting options for each feature
Menu Feature
Default factory
setting
Available setting options
1
RHOLD 500 Refresh hold.
– To enable this function, select a value within the range of 100 to 9900.
– To disable this function, set all digits to zero (“OFF” will be indicated).
Note: Select OFF to enable data hold (manual trigger).
D-LOG HAND Available options for data logging:
– HAND: manual data logging.
– TIME: interval (automatic) data logging, where the interval is according to the
LOG TIME setting.
LOG TIME 0001 S Logging interval for interval (time) data logging. Select a value within the range
of 0001 second to 9999 seconds.
dB dBm – Available options: dBm, dBV, or OFF.
– Select OFF to disable this function for normal operation.
dBm-R 50 Ω Reference impedance value for dBm measurement. Select a value within the
range of 1 Ω to 9999 Ω.