4 Features and Functions
116 Keysight 34970A/34972A User’s Guide
TRIG:SOURCE ALARM1 Select the alarm configuration
TRIG:COUNT 2 Sweep the scan list 2 times
CALC:LIM:UPPER 5,(@103) Set the upper limit
CALC:LIM:UPPER:STATE ON,(@103) Enable the upper limit
OUTPUT:ALARM1:SOURCE (@103) Report alarms on Alarm 1
ROUT:MON (@103) Select monitor channel
ROUT:MON:STATE ON Enable monitoring
INIT Initiate the scan
To stop a scan, send the ABORt command.
To Next Page
Loading...
