6 53220A/53230A Math, Graphing, and Data Logging
244 Keysight 53220A/53230A User’s Guide
Starting the data logger
Pressing the Run softkey enables data logging. Data logging begins following any
specified start delay when a valid path/file exists. A default path and file name of:
Internal\DataLog
is used when the data logger application is started. Select Yes to overwrite the file
and begin.
Viewing readings
A trend chart is populated as readings are logged. After data logging completes,
the readings are stored in the file specified. Pressing View Results when logging is
stopped and the readings are saved, or when logging is complete, displays a trend
chart of the saved readings.
Pressing View Results after logging Time Stamp measurements will display
“Graphics not supported for this function”.
To Next Page
Loading...
