Keysight DSOX3034T User Manual

322 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
20 Save/Email/Recall (Setups, Screens, Data)
3 In the Save Trace and Setup Menu, press Format; then, turn the Entry knob to
select the type of file you want to save:
• Setup (*.scp) — The oscilloscope's horizontal timebase, vertical sensitivity,
trigger mode, trigger level, measurements, cursors, and math function
settings that tell the oscilloscope how to make a particular measurement.
See “To save setup files" on page 323.
• 8-bit Bitmap image (*.bmp) — The complete screen image in a reduced color
(8-bit) bitmap format. See “To save BMP or PNG image files" on page 324.
• 24-bit Bitmap image (*.bmp) — The complete screen image in a 24-bit color
bitmap format. See “To save BMP or PNG image files" on page 324.
• 24-bit image (*.png) — The complete screen image in a 24-bit color PNG
format that uses lossless compression. Files are much smaller than the BMP
format. See “To save BMP or PNG image files" on page 324.
• CSV data (*.csv) — This creates a file of comma-separated values of all
displayed channels and math waveforms. This format is suitable for
spreadsheet analysis. See “To save CSV, ASCII XY, or BIN data files" on
page 324.
• ASCII XY data (*.csv) — This creates separate files of comma-separated values
for each displayed channel. This format is also suitable for spreadsheets. See
“To save CSV, ASCII XY, or BIN data files" on page 324.
• Binary data (*.bin) — This creates a binary file, with a header, and data in the
form of time and voltage pairs. This file is much smaller than the ASCII XY
data file. See “To save CSV, ASCII XY, or BIN data files" on page 324.
• Lister data (*.csv) — This is a CSV format file containing serial decode row
information with commas separating the columns. See “To save Lister data
files" on page 327.
• Reference Waveform data (*.h5) — Saves waveform data in a format that can be
recalled to one of the oscilloscope's reference waveform locations. See “To
save reference waveform files to a USB storage device" on page 327.
• Multi Channel Waveform data (*.h5) — Saves multiple channels of waveform
data in a format that can be opened by the N8900A Infiniium Offline
oscilloscope analysis software. You can recall the first Analog or Math
channel from a multi channel waveform data file.

Keysight DSOX3034T Specifications

General

Brand	Keysight
Model	DSOX3034T
Category	Test Equipment
Language	English