352 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
22 Utility Settings
5 Press File Name to open the Remote Log Filename Menu where you can specify
the name of the file (on the USB storage device) to which remote commands
are logged.
6 Press Display On to enable or disable the screen display of logged remote
commands and their return values (if applicable).
7 Press Transparent to disable or enable a transparent background for the remote
command logging screen display.
Enable to make the background transparent. This lets you view underlying
waveforms.
Disable for a solid background which makes the logged remote commands
easier to read.
Performing Service Tasks
The Service Menu (under [Utility] > Service) lets you perform service-related tasks:
• “To perform user calibration" on page 352
• “To perform hardware self test" on page 355
• “To perform front panel self test" on page 356
• “To display oscilloscope information" on page 356
• “To display the user calibration status" on page 356
For other information related to oscilloscope maintenance and service, see:
• “To clean the oscilloscope" on page 356
• “To check warranty and extended services status" on page 356
• “To contact Keysight" on page 357
• “To return the instrument" on page 357
To perform user calibration
Perform user-calibration:
To Next Page
Loading...
Need help?
General
