44 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
1 Getting Started
Front Panel Overlays for Different Languages
Front panel overlays, which have translations for the English front panel keys and
label text, are available in several languages. The appropriate overlay is included
when the localization option is chosen at time of purchase.
To install a front panel overlay:
1 Gently pull on the front panel knobs to remove them.
2 Insert the overlay's side tabs into the slots on the front panel.
3 Reinstall the front panel knobs.
Front panel overlays may be ordered from www.keysight.com/find/parts using the
following part numbers:
21. Waveform generator
outputs
Built-in, license-enabled waveform generator can output arbitrary, sine, square, ramp, pulse,
DC, noise, sine cardinal, exponential rise, exponential fall, cardiac, or Gaussian pulse
waveforms on the Gen Out BNC connectors. Modulated waveforms are available on Wave Gen
except for arbitrary, pulse, DC, and noise waveforms. Press the [Wave Gen] key to set up the
waveform generator. See Chapter 19, “Waveform Generator,” starting on page 301.
To Next Page
Loading...
Need help?
General
