464 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
29 I2S Triggering and Serial Decode
2 In the Search Menu, press the Search softkey; then, turn the Entry knob to select
the serial slot (Serial 1 or Serial 2) on which the I2S signals are being decoded.
3 In the Search Menu, press Search; then, select from these options:
• = (Equal) — finds the specified audio channel's data word when it equals the
specified word.
• != (Not Equal) — finds any word other than the specified word.
• < (Less than) — finds when the channel's data word is less than the specified
value.
• > (Greater than) — finds when the channel's data word is greater than the
specified value.
• >< (In Range) — enter upper and lower values to specify the range to find.
• <> (Out of Range) — enter upper and lower values to specify range not to find.
• Errors — finds all errors.
For more information on searching data, see “Searching Lister Data" on page 152.
For more information on using the [Navigate] key and controls, see “Navigating the
Time Base" on page 75.
To Next Page
Loading...
Need help?
General
