70
S20
S11
E: Repeat all steps to complete the roof assembly, making sure that a 5mm square opening is left in the center
of the roof assembly. (g. 27.9, 27.10 and 27.11)
continue with the other 3
assemblies leaving a 5mm
square opening in the
centre
G
continue with the other 3
assemblies leaving a 5mm
square opening in the
centre
G
Continue with the other 3
assemblies leaving a 5mm
square opening in the centre
5mm square
Hardware
18 x #8 x 2” Wood Screw
9 x #8 x 1-3/8” Wood Screw
Fig. 27.9
Fig. 27.10
Fig. 27.11
Other Parts
2 x Roof Panel
Step 27: Attach Roof Panels
Part 3
To Next Page
Loading...
