Kinco CD3 Series - CANopen Communication Parameters

Kinco FD3&CD3 User Manual
116
For example, If you want a node in the operational status to return to the pre-operational status,then the controller
needs to send following message:
0x000:0x80 0x02
11.3 CANopen communication parameters
LED
Display
Internal
Address
Name
Meaning
Default
Value
d5.00
2FF00108
Store_Loop_Data
1
：
Save all control parameters except
motor parameters
10：Initialize all control parameters
except motor parameters
0
d5.01
100B0008
ID_Com
Driver station No.
Note:It needs to save and restart driver
after changing this parameter.
1
2F810008
CAN_Baudrate
Baudrate of CAN port:
Note: It needs to save and restart driver
after changing this parameter.This
parameter can only set in KincoServo
software.
50