Kinco FD3&CD3 User Manual
Click Add and double click the required object from the Object Dictionary. The selected object is then
added to the list.
Click Delete. The selected object is removed from the list.
Click Help to read a description of the selected object in the Object Dictionary.
5.2 Init save reboot
Click Controller->Init Save Reboot. The following window appears:
Figure 5-4: Init save reboot
Click the corresponding item to finish the necessary operation.
Information
After completing the init control parameters, the Save Control Parameters and Reboot buttons
must be clicked to load the default control parameters to the controller.
5.3 Firmware update
A new motor controller is always delivered with the latest firmware version. If the firmware needs to be
updated for any reason, load the new firmware via menu item Controller->Load Firmware.
Figure 5-5: Load firmware
To Next Page
Loading...
