Kinco CD3 Series - Servo Motor Installation

Kinco FD3&CD3 User Manual
14
2.3 Servo motor installation
2.3.1 Installation requirement
Alarm
 Please install it indoor of no rain and direct sunlight.
 Please do not use this product in the corrosive environment (Hydrogen sulfide, Sulfurous acid,
Chlorine, Ammonia, Sulfur, Chlorinated gas, Acid, Alkaline, Salt, etc), flammable gas,
combustible and etc.
 Occasion (without Grinding fluid, Oil mist, Iron powder, cutting and etc).
 Occasion (good ventilation, no Moisture, oil and water, no heat source such as stove).
 Occasion which is easy to be checked and cleaned.
 Occasion without shock.
 Please do not use motor in the closed environment.
 For installation spacing, please follow the requirements of this manual. Using life of motors
depend on level of working environment.
2.3.2 Environment conditions
Environment
Conditions
Working
temperature
0℃～40℃（no ice）
Working humidity
5～95%RH（no condensation）
Storage
temperature
-10℃～70℃（no ice）
Storage
temperature
5
～
95%RH
（
no condensation
）
vibration
Running, less than 49m/s2
（
5G
）、
stopping, less than 24.5m/s2
（
2.5G
）
collision
Less than 98m/s²（10G)
Protection level
IP65（Except for shaft hollow part，part of motor connector connect terminal ）
Altitude
Less than 1000m
2.3.3 Precautions
Item
Description
Stain proofing
Please wipe anti-rust agent on the motor's shaft and then make some anti-rust treatments.
Installation
method
Improper installation method will cause damage of motor's encoder. Please note the following during
the installation process:
● When operators installation pulleys on the servo motor shaft with key, it is necessary to use screw
hole. In order to install pulleys, operators need to insert double-headed nail into screw holes and use
washers on the surface of coupled end. Then use nuts to fix into pulleys gradually.
● For servo motor shaft with keys, Operator need to use screw hole on the shaft to install. For motors
shaft with no key, operators need to use friction coupling or other analogous methods.