Kinco FD3&CD3 User Manual
Enter menu.
Check the values of the parameters.
Confirm the setting to access the next step.
When the internal 32 bit data appears at the display, press and hold to switch high / low 16 bit.
Error or warning status. Lit up for 1s and dark for 1s indicates a controller error. Continuous flashing (3
consecutive rapid flashes) indicates that the controller is in a warning state.
4.2 Panel menu structure and navigation
The following flowchart shows the main structure of the panel. The user can select single parameters,
modify values and access special functionsusing this flow. A list of all accessible parameters and values can
be found in chapter 9.
Figure 4-1: Parameters setting
To Next Page
Loading...
