Kinco CD3 Series - Page 13

Kinco FD3&CD3 User Manual
9
Firure 2-2 :CD&FD433 623 Product installation drawing
Warning
 Please according to the installation Hole processing figure before the punch.

Please carefully read and follow the requirements in this manual, which will help
you set up and operate drives correctly, and achieve optimal drive performance.
 Please install it in a control box in a rainless room with direct sunlight, and it
should be surrounded by non-flammable products.
 This product complies with EMC standards 2014/30/EU and low-voltage standards
2014/35/EU (LVD).

No grinding fluid, oil mist, iron powder, chips, etc.

Well-ventilated, dry and dust-free place.
 A vibration-free site.
 Do not use gasoline, diluent, alcohol, acid and alkaline detergents to avoid
discoloration or damage.