Kinco CD3 Series - Page 21

Kinco FD3&CD3 User Manual
17
Note
1、Only the FD3-LA/CA bus servo driver contains SW1 and SW2 dial-code switches, not the CD3
pulse servo driver.
2、The driver fan is replaceable. If the fan fails, please open the fan cover and replace the fan of
the same type.The fan parameters are required as follows：
Driver model
CD423&FD423
CD623&FD623、CD433&FD433
Supply voltage：
12VDC，0.12A
24VDC，0.12A
Size dimension
：
40mm
×
40mm
×
10mm
60mm
×
60mm
×
15mm
Warning
Before installing and maintaining the drive, all power must be turned off and the heating
connectors prohibited.
Do not open the drive while it is live and ensure that all enclosures and cabinet doors are closed
when operating.
Do not remove safety devices and do not touch live parts or devices.
Be sure to connect the PE wire correctly before powering on the driver.