Kinco CD3 Series - Page 28

Kinco FD3&CD3 User Manual
24
19
AIN1+（/MA）
Analog input port1，±10V
MA、MB、MZ，MA/、MB/、MZ/
RS422 difference of 5V is supported
Signal input, maximum pulse
frequency is 4MHz.
Signal type：
①Pulse +direction（PLS+DIR）
②Forward and backward pulse
（CW/CCW）
③A+B phase
21
AIN1 （ /MB）
23
AIN2+（/MZ）
Analog input port2，±10V
25
AIN2-
27
MA+/(MA)
TTL signal：MA+,MA-MB+,MB-,MZ+,MZ-，
Max frequency 500KHz, voltage range DC
3.3-30V
Differential signal ：
MA,/MA,MB,/MB,MZ,/MZ，
Max frequency 4MHz, voltage range DC
3.3-5V
Support TTL/ differential signal at
pulse signal input terminal.
Signal type：
①Pulse +direction（PLS+DIR）
②Forward and backward pulse
（CW/CCW）
③A+B phase
29
MA-
31
MB+/(MB)
33
MB-
35
MZ+/(MZ)
18
MZ-
22
+5V
Internal 5V power output
Output 5V motor A, B, Z signals,
frequency output.
Range:0〜65536；
Used for multi-axis synchronization,
maximum output frequency is
5MHz.
24
GND
26
ENCO_Z
Encoder output
28
ENCO_/Z
30
ENCO_B
32
ENCO_/B
34
ENCO_A
36
ENCO_/A