Issue: 08/2012
In the lm gate the lm is positioned precisely. By adjusting the lm pressure skate
you can optimize the picture steadiness.
After threading the lm, close the lm track with the lm pressure skate to guide the
lm. The four ceramic rollers guide the lm laterally.
Shutter housing
Á Film gate
 Film runner strips (2)
à Ceramics roller (4)
Ä Film pressure skate 35 mm
Å Intermittent sprocket
Aperture changer (option)
For smooth and silent lm running it is very important that the pressure of the lm
skate is adjusted accurately.
X
Z Adjusting the lm pressure skate, see chapter 6.4.2.
Z Adjusting the height of the lm pressure skate, see chapter 6.4.3.
Z Changing the lm runner strips, see chapter 6.4.4.
2
1
5
6
7
3
4
To Next Page
Loading...
