Issue: 08/2012
The intensity of current can be adjusted by turning the hand wheel, which moves the
iron core in the coils. The adjusted intensity of currents can be read on the ammeter.
The intensity of current can be adjusted via a potentiometer. The adjusted intensity of
currents can be read on the ammeter.
The intensity of current can be adjusted via a potentiometer or optionally via the LDU
display unit. The adjusted intensity of currents can be read on the ammeter.
X
Z Detailed information about the rectier can be found in the corresponding operating
manual.
Z Values for the intensity of currents, see chapter 6.4.16.
To Next Page
Loading...
