Safety Instructions
Issue: 08/2012
S Do not work around the machine with long loose hair, or loose clothing such as
scarves or ties, they may get trapped in the drive mechanism and pull you in.
S Only open shutter housing when projector is standing still with power disconnected.
If the projector is running with covers open be careful and do not touch the rotating
shutter or other moving parts. Serious cuts can result.
S Do not put your ngers between the lm track and lm pressure skate or between
sprockets and pad shoes.
U The projector has been designed for use with a . Never use
another lamp than specied.
U In order to ensure that the projector complies with electromagnetic capability (EMC)
and safety requirements, it should be always operated with all .
U Do not spill of any kind on this projector. If any liquid is coming into the pro-
jector, switch off, disconnect from mains and call service.
U Always switch off main switch, before the projector housing. To keep the
cabinet looking brand-new, periodically clean it with a soft cloth. Stubborn stains
may be removed with a cloth lightly dampened with mild detergent solution. Never
use strong solvents, such as thinner or benzine or abrasive cleaners, since these
will damage the cabinet surface.
U To ensure the highest optical performance and resolution, the projector lenses are
specially treated with an anti-reective coating. Therefore, avoid touching the coated
lens surface.
To remove dust on the lens, use a soft dry cloth (Cleaning set from Kinoton).
Do not use a damp cloth, detergent solutions or thinner.
To Next Page
Loading...
