Kinoton FP 75 E - Projection; Forward Running at 24 Fps or 25 Fps; Reverse Running (Option with Reverse Running Unit); Projecting at VARIA Speed (Option)


Operation
Issue: 08/2012

 
• To start press
.
• Press “in”
to select the speed of 25 frames/seconds (factory-set), press “out” to
select the speed of 24 frames/seconds (factory-set).
• Pushing
you can stop the forward running of projector.
 
• To start press
.
• Pushing
you can stop the reverse running of projector.
X 
The reverse running speed is factory-set (in frequency inverter).
 
At VARIA the projector runs in step mode - it projects forwards and optional reverse
from 10 fps to 30 fps.
Press “in“ activates the VARIA function - press “out” activates 24 fps.
Select the desired projection speed of 10 - 30 fps by turning the
VARIA rotary switch.
Press to start.
Press to stop the projection running.