Components
Issue: 08/2012
The two-format is suitable to reproduce 35 mm and 70 mm lm
and sound formats.
» Film is transported through the projector from top to bottom.
» The intermittent sprocket is directly driven via the drive unit.
» The lm gate, the intermittent sprocket and its amplier are water-cooled.
» The projector can be equipped with lm reels up to 2000 m.
» Two electronic frictions are driven via directly anged DC motors.
» The lm can also be guided via a set of guide rollers to and from a non-rewind
system.
» The shutter is an opposed rotating double shutter. It is driven from a synchronous
motor.
» The projector can be equipped with an automation system like, EMK 1, CCA 3,
DMP 1 and SA 2. Sensors can be installed in the to read metal foil tape for the
purpose of an automation system.
» An available reverse-scan sound device is mounted on projector head and is suit-
able to reproduce analog sound and optional digital sound DOLBY SR·D.
» For reading 70 mm sound track an optional magnetic sound device can be
mounted.
» Other readers like DTS and SDDS reader can be installed on the projector.
To Next Page
Loading...
