Operation38 39
TIPS FOR BRUSH-SUCTION
We generally recommend using the power perfor-
mance level auto. On this power setting, the fully
automatic propulsive force control makes it possible
to achieve a smooth sliding motion that is adjusted
to the floor type. The other power performance lev-
els are specially intended for specific types of carpet:
Power performance
level
With normal function for the floor types
soft (50 W) – light rugs, floor mats
– silk carpeting
– carpets with fringes
– delicate deep-pile carpeting
– deep-pile carpeting
– very thick velour carpeting
auto or med, max – hard floors
– stairs
– Sisal floors
1. Use the max power performance level for carpet-
ed floors with excessive amounts of fine dust.
2. Floor detection should always be activated when
using the Automatic Electric Brush.
3. Set the correct power performance level accord-
ing to the table.
4. If you want to brush-suction a delicate floor even
more gently, activate hard floor mode using the
function key before moving onto the surface.
5. Every time you switch on the Upright Vacuum
Cleaner, you will need to switch back to hard
floor mode if you want to continue using this, as
the hard floor mode is automatically deactivated
when the Upright Vacuum Cleaner is switched
off.
6. Move the device evenly back and forth.
To Next Page
Loading...
