ATTACHING THE KOBOLD MF600 CLEANING CLOTH
TO THE CLOTH HOLDER
NOTE
Risk of damage from improper use!
• When attaching the cleaning cloth to the cloth
holder, always ensure that the cloth is fastened
evenly. The cloth must not be positioned at an
angle to the cloth holder.
1. To attach the cleaning cloth to the cloth holder,
push the green nose
of the cleaning cloth into
the slot on the cloth holder as far as it will go.
2. Then press the cloth holder directly onto the
cloth
.
The back of the cloth is fastened to the cloth holder
using Velcro and the cloth fits into place
.
To Next Page
Loading...
