Operation56 57
ATTACHING THE CLOTH HOLDER TO THE SP600
WARNING
Risk of electric shock!
• For your own safety, switch off the vacuum
cleaner at the handle every time you replace the
MF600 cleaning cloth.
NOTE
Risk of damage from improper use!
• Avoid forced insertion and extraction of the
cloth holder.
1. Place the cloth holder onto the floor with the
cloth correctly attached.
2. Tilt the vacuum cleaner backwards in the stand-
by position
.
The SP600 is now positioned on its rollers.
3. Roll the vacuum cleaner directly onto the cloth
holder.
4. Tip the vacuum cleaner onto the cloth holder
.
The cloth holder will click as it engages with the
SP600
. The device is now ready for use.
The cloth holder is symmetrical. You simply
need to approach the cloth holder square on to
ensure that the SP600 correctly engages with the
cloth holder.
To Next Page
Loading...
