SERVICE MANUAL
8 11NOV05 – SM7648-1
Reference Table for Adjustment Procedures
After installing: Do:
• CP1 BOARD - MCU
• MONITOR LCD AY
• LENS AY
1. LENS - “Electronic Image Stabilization (EIS) Shift Lens Adjustment”
on Page 30
2. LENS - “EIS Confirmation and Adjustment” on Page 33
3. LENS - “Lens Adjustment (90 cm)” on Page 36
4. LENS - “Lens Adjustment (Infinity)” on Page 38
5. CCD - “Auto White Balance (AWB)” on Page 40
6. CCD - “White Point Defect Detect” on Page 43
7. CCD - “Black Point and White Point Defect Detect” on Page 46
8. PAF SENSOR - “Up and Down” on Page 49
9. PAF SENSOR - “Uniform” on Page 52
10. PAF SENSOR - “Parallax” on Page 55
11. PAF SENSOR - “Distance” on Page 58
12. Setting the Defaults for the CAMERA - “Set Default” on Page 62
13. Setting the ID for the CAMERA - “USB Storage” on Page 64