Koden CVS-852 - Functional Specifications

Chapter3 CVS-842/852/843
Specifications Operation Manual 
Color tone
3 steps (1､2､3)
Background color
9 steps (1､2､3､4,5,6,7,8,9)
Image mix type
3 steps (A､B､C)
Digital depth display
4 steps (Off､Large､Middle､Small)
Digital depth display position 2 ways (Up or Down)
Depth scale display
3 ways (Off､One, All)
Scale position 2 ways (Edge or Center)
Scale numeral display 2 ways (Large or Small)
Time mark
3 ways (Off, 10 sec､1 min)
Image feed direction 3 ways ( , , )
Image split
:
Image swap
Water temperature 3 ways (Off,
o
C,
o
F)
Auto function Sounding depth, shift
Clock function Year, Month, Day, Hour, Minute, Second (NOTE: CVS-843 has no
Year, Month, Day, a Day of the Week displays.)
Depth unit 5 kinds (m, hiro, fm, I.fm, ft)
Bottom detection range 2 ways (Within or outside of sonar display)
Depth sounding 3 ways (Auto, High frequency, Low frequency)
Marker Depth marker (VRM), Scale, Zooming range marker, Division
marker, Time marker, Color pattern, Alarm marker, Event marker
Rotary controls Brilliance, Gain, Enhancement, STC, Sounding range, Image
mode ﾞ
Other functions Enhance, White line, Flicker reduction, A scope, Information window
(not available in CVS-843), Temperature graph, Mark (Position,
Distance, Bearing, Elapsed time), Draft, Bottom detection start
position, Sonic correction, Temperature correction, Speed
correction, Int/Ext sync switching, PRF, GAIN law､STC law, Color
change, Key switch lock
Navigation data Ship’s position (Lat/Lon every 0.001 Min, Loran C LOP), Ship’s
speed (km/h,mph,kt), Owh ship’s bearing, Event (Position ,Distance
(km,sm,nm), Direction, Elapsed Time)
Input data format NMEA 0183 Ver2.0/1.5(GGA,GLL,GTD,MTW, VTG)
Output data format NMEA 0183 Ver2.0 (DBS,DBT,DPT,MTW,TLL)
A
B
B
A
B AA B
:
:
3.2 Power supply requirements
DC operation
Input voltage: 10.8 - 31.2
VDC (CVS-842C/852C/843C, CVS842P/852P/843P)
2
1.6 - 31.2 VDC ( CVS-842T/852T/843T)
Input power: CVS-842/843: 30 W Max
CVS-852: 45 W Max
CVT-10: 75 W Max (When used with 5 kW transmitter)
AC operation
An AC/DC rectifier P
S-006 must be used.
Input voltage range: 100/
115 VAC or 200/ 230 VAC
Voltage fluctuation allowance:
+/- 10%
Frequency fluctuation allowance:
47 - 63 Hz
3-2 93132692-01