Koden CVS-852 - Bearing; Boat Speed; Color Bar Scale; Present Position

Chapter 6 CVS-842/852/843
Using the Menu Operation Manual
6.6.7 Depth value
Selects the text size of a depth indication on the screen.
Selections: OFF､ Large, Middle, Small
Initial setting: Large
6.6.8 Depth value position
Sets up the position of the digital depth indication on top or bottom of the screen.
Selections: Bottom, Top
Initial setting: Bottom
6.6.9 Scale
Sets up the position of the depth scale on the screen. The choices are; a single scale display shown at
the right hand side of a single or dual screen or; dual scale displays shown in the left hand side of
each screen.
Selections: OFF, Single, All
Initial setting: Single
6.6.10 Scale position
Sets up the horizontal position of the depth scale on the screen, right hand side or the center.
Selections: Side, Center
Initial setting: Side
6.6.11 Scale value
Selects the size of the depth scale value.
Selection: Large, Small
Initial setting: Small
6.6.12 Time Mark
Selects the time marker on or off or time unit (every 10 seconds, 1 minute).
Selections: OFF, 10 sec, 1 min
Initial setting: 10 sec
6.6.13 Image direction
Selects the direction of image movement.
Selections: , ,
Initial setting:
6-12 0093132692-05