96
Inserting a floppy disk
With the label of the floppy disk facing upward, insert
it into the disk drive. Press the disk inward until it
clicks into place.
Malfunctions will occur if you use excessive force to
insert the disk. Disks must be inserted gently, and
straight in.
Removing a floppy disk
To remove a floppy disk, first make sure that the disk
access indicator is dark. Then press the eject button and
remove the disk.
If the disk does not come out when you press this but-
ton, do not attempt to remove the disk by force. Please
contact your dealer.
Head cleaning
If the heads of the disk drive are become soiled, errors
may occur during saving, loading or formatting. It is
important to clean the heads regularly using a com-
mercially available wet-type 3.5 inch double-sided
head cleaning disk. For the cleaning procedure, refer to
the owner’s manual for the cleaning disk.
Disk access
indicator
Disk access
indicator
Eject button
To Next Page
Loading...
