18
Listening to a demo song
Contents of the disks
This instrument comes with one floppy disk (KMFD-
00P).
PRELOAD.PCG
• Preloaded data (programs, combinations, drum
kits, global settings)
When you load PRELOAD.PCG, it will be written
into internal memory. This data is preserved even
if the power is turned off.
When you load PRELOAD.PCG, the data that had
been written before loading this data will be
rewritten. If you wish to keep this data, you must
first save it on a floppy disk before loading PRE-
LOAD.PCG (☞p.38).
PRELOAD.SNG
• Demonstration song and demonstration cue list
data
When you load PRELOAD.SNG, it will be written
into internal sequencer memory. This memory is
volatile, and the data will be lost when the power
is turned off.
When you load PRELOAD.SNG, the data that had
been written before loading this data will be
rewritten. If you wish to keep this data, you must
first save it on a floppy disk before loading PRE-
LOAD.SNG. (☞p.38)
Loading the demo song data in
Disk mode
1 Insert the included “KMFD-00P” floppy disk into
the disk drive.
For details on handling a floppy disk and inserting
it into the disk drive, refer to ☞p.93.
2 Press the [DISK] key (the LED will light).
You will enter Disk mode.
3 Press the [F1] (“Load”) key to access the Load page.
File information will be displayed.
4 Use the cursor keys [ ], [ ] to select “PRE-
LOAD.SNG.”
The display will be highlighted. This is the demo
song data.
5 Press the [F8] (“UTILITY”) key, and choose the
“Load selected” utility.
6 Press [8]“OK” key.
A dialog box will appear.
7 Press the check boxes to add a check mark.
Press the VALUE [ ] to check “Load PRE-
LOAD.PCG too.” When the data is loaded, the
.PCG file will be loaded along with the .SNG file.
8 Press the [F8] (“OK”) key.
The data will be loaded in the order of PRE-
LOAD.PCG and PRELOAD.SNG.
Never remove the media while data is being
loaded.
If the Memory Protected dialog box appears,
uncheck memory protect, and try the loading oper-
ation once again. (☞p.38)
To Next Page
Loading...
