88
Set the KARMA module [A] “Input Channel” and
“Output Channel” to 01 and 01 respectively. Set the
KARMA module [B] “Input Channel” and “Output
Channel” to 02 and 02 respectively.
4 Access the S.PLAY 6.1: KARMA Setup page.
Here you can select the GE for KARMA modules [A]
and [B], and set their parameters. Check “Run.” You
can use the “Copy KARMA Module” utility menu
command to copy the entire KARMA function set-
tings from a program. (☞ p.85 “Realtime recording
using the KARMA function (single-track record-
ing)” 4, 5)
5 Press the [ON/OFF] key to turn on the KARMA
function.
If you set “Play (Track Select)” to Track 01 [Ch01],
you can use KARMA module [A] to play a phrase
on A001: Acoustic Piano.
If you set “Play (Track Select)” to Track 02 [Ch02],
you can use KARMA module [B] to play a phrase on
A023: M1 Organ.
You can set the KARMA module “Key Zone” (6.1-
3)” and “Key Thru (6.1–4)” parameters to specify
the range of the keyboard that will control
KARMA and the range that you can play manu-
ally. (☞p.80 “KARMA function settings in Pro-
gram mode” – Setting the keyboard range that will
operate the KARMA function”)
The tempo of the SMF and KARMA function can-
not be set independently.
6 If you wish to synchronize the KARMA module to
the SMF that is playing, set “Quantize Trig” On
(checked).
Access the S.PLAY 6.1: KARMA Parm1 page.
The trigger timing will be quantized to the nearest
16th note interval of the SMF beat.
Synchronizing the KARMA function
The “Quantize Trig” parameter
The trigger timing of the KARMA module will depend
on the setting of the “Quantize Trig” parameter.
On (checked): The trigger timing will be quantized to
the nearest 16th note interval of the base tempo.
Off (unchecked): Triggering will occur at the moment
you play the keyboard or send in a trigger through
Dynamic MIDI.
Synchronization between KARMA modules
[A], [B], [C], and [D]
In Combination, Sequencer, and Song Play modes, four
KARMA modules can be operating. “Quantize Trig”
can be set independently for each of these four
KARMA modules.
“Quantize Trig” Off: The KARMA module will be trig-
gered at the moment you play the keyboard or send in
a trigger through Dynamic MIDI. The corresponding
KARMA module will be triggered immediately, with-
out synchronization between KARMA modules.
“Quantize Trig” On: Triggering will be quantized to
the nearest 16th note interval of the timing of the first-
triggered KARMA module that is now operating.
Even if you are simultaneously triggering multiple
KARMA modules from the keyboard or the [CHORD
TRIGGER] keys, you should set each of these KARMA
modules to “Quantize Trig” On.
Synchronizing songs, patterns, and RPPR
performance in Sequencer mode
If you wish to play or record a KARMA module in syn-
chronization with the timing of a currently-playing
song, pattern, or RPPR, set “Quantize Trig” On.
“Quantize Trig” Off: The KARMA module will be trig-
gered at the timing that you play the keyboard or send
in a trigger through Dynamic MIDI. It will not synchro-
nize to the currently-playing song, pattern, or RPPR.
“Quantize Trig” On: The KARMA module will be trig-
gered at the nearest 16th note interval of the currently-
playing song, pattern, or RPPR.
If you want patterns played by RPPR to synchro-
nize with the currently-operating KARMA func-
tion, set “Sync” (SEQ 5.1: RPPR, RPPR Setup page)
to SEQ.
Synchronizing with SMF playback in Song
Play mode
If you want the KARMA module to be synchronized with
a currently-playing SMF, set “Quantize Trig” to On.
“Quantize Trig” Off: The KARMA module will be trig-
gered at the moment you play the keyboard or send in
a trigger through Dynamic MIDI. It will not synchro-
nize to the currently-playing SMF.
“Quantize Trig” On: Triggering will synchronize to the
nearest 16th note interval of the currently-playing SMF.
To Next Page
Loading...
Need help?
General
