75
Basic functions
Song Play mode
Playing SMF data
Direct playback from a floppy disk
When you wish to playback SMF data that is com-
patible with the GM/GS/XG standards, set “Bank
Map” (Global 1.1: System Preference page) to
GM(2).(☞PG p.136)
1 Press the [S.PLAY] key to enter Song Play mode.
2 Insert a floppy disk containing SMF data into this
instrument’s disk drive.
3 Press either the [LOCATE], [START/STOP], or
[PAUSE] key.
The data will be loaded from floppy disk, and “File
Select” will show the SMF filenames.
If you press the [START/STOP] key, the data will
be loaded and playback will begin.
In the following cases, “File (File Select)” will not
display the SMF filenames.
• There is no SMF data on the floppy disk.
• There is no SMF data in the currently selected
directory.
To move to the directory that contains the SMF data,
go to S.PLAY 4.1: Select Directory and use the [F5]
(“UP”) or the [F6] (“OPEN”) key to move to the
level that contains the desired SMF data.
Then verify that the SMF you wish to play (filename
extension .MID) appears in the LCD screen, and
press the [EXIT] key to return to S.PLAY 1.1: PLAY.
• A jukebox list has not been created but the
“Jukebox” check box is checked.
4 Choose “File Select,” and use the VALUE [ ], [ ]
keys to select the file that you wish to play.
5 Press the [START/STOP] key.
If you pressed the [LOCATE] or [PAUSE] key in step
3, playback will begin. If you pressed the [START/
STOP] key, playback will stop.
If the S.PLAY 1.1: Play Preference page “Auto Start”
parameter is checked (default setting), all songs that
can be selected in “File Select” will play consecu-
tively.
6 If a song is playing, press the [START/STOP] key
once again to stop playback.
Starting/stopping playback for each song
In the S.PLAY 1.1: Play, Preference page, uncheck
“Chain to next file” or “Auto Start,” and press the
[START/STOP] key. Playback will begin, and will stop
when each song ends. For details on these settings,
refer to PG p.118.
Playing along with SMF data (Minus-one play)
You can enjoy “minus-one” play by playing back SMF
data, muting a specific part, and playing that part
yourself.
1 Playback the SMF data, identify the track whose
part you wish to play, and stop playback (☞p.74).
2 In S.PLAY 1.1: Play, select the program page.
3 Use “Play (Track Select)” to select the track for the
part that you want to play from the keyboard.
When you play the keyboard, the program of the
selected track will be heard.
4 In “PLAY/MUTE,” MUTE the track that you your-
self wish to play.
If you want the musical data of the track selected in
3 to sound along with your own playing, set
“PLAY/MUTE” to PLAY.
5 Press the [START/STOP] key to begin playback,
and play along on the keyboard with the song.
KARMA
During “minus-one” play, you can use the KARMA for
your keyboard performance (
☞p.87).
File Select
Jukebox
To Next Page
Loading...
