KVH Industries TracPhone V7 HTS User Manual

TracPhone V7-HTS User’s Guide
17
Getting Started
System Startup
The ICM shows the following screens during startup. Similar
messages will also appear on the web interface. If the display shows an
error message, see “Error and Warning Messages” on page 121.
ICM Screen Description
ICM
INITIALIZING...59
The system is running a self test
routine
NO-TRANSMIT ZONE 1
AZ RANGE: 335-025
Displays the azimuth ranges of
any user-configured no-transmit
zones
ANTENNA READY
WAITING FOR MODEM
The antenna is waiting for the
ICM’s modem to initialize
WAITING FOR GPS The antenna is waiting for a GPS
fix
GPS: ACQUIRED
41.5198N, 123.5817W
When GPS acquires a fix,
momentarily displays your
latitude/longitude
MODEM COMMS: OK The ICM’s modem is
communicating OK
RECEIVING SATELLITE
INFO FROM MODEM
The ICM’s modem is providing
satellite identification data to the
antenna
ANTENNA STATE
INITIALIZING
The antenna is initializing
SEARCHING FOR 105.0W
SATELLITE
The antenna is searching for the
mini-VSAT Broadband satellite
RF RADIATION HAZARD!
TRANSMIT INHIBITED
If the antenna is pointing within
an enabled no-transmit zone, it
will not transmit
OFFLINE
TRACKING 105.0W
The antenna is now tracking the
satellite
ONLINE
TRACKING 105.0W
The ICM’s modem has accessed
the mini-VSAT Broadband
service; the system is ready for
use!

KVH Industries TracPhone V7 HTS Specifications

General

Brand	KVH Industries
Model	TracPhone V7 HTS
Category	Antenna
Language	English