TracPhone V7-HTS User’s Guide
56
Voice Connections
Making a Ship-to-Shore Call
To place a call from the vessel, follow these steps:
1. Make sure the TracPhone system is online.
2. Pick up the handset on any phone connected to the ICM. You
should hear a dial tone. If you don’t, check the phone line
status on the web interface’s Home tab.
3. Dial the phone number you wish to call. The dialing sequence
you use depends on the vessel’s Line 1 phone number.
Dialing a Number Outside the Country Assigned to Line 1
Dial the number as an international call:
<International prefix, as originating from your Line 1 country>
+ <country code>
+ <area/city code>
+ <local phone number>
Dialing a Number Within the Country Assigned to Line 1
Dial the number as an in-country call:
<area/city code>
+ <local phone number>
Dialing a Number Within the Country & Area Code Assigned to Line 1
Dial the number as a local call:
<local phone number>
NOTE: When you place a call, your voice travels to a satellite in space then
back to Earth. This transit will cause a brief delay (approximately 1/2 second)
in your conversation.
To Next Page
Loading...
Need help?
General
