KYMCO MX 125 - Page 124

10. FINAL REDUCTION/
TRANSMISSION SYSTEM
10-8
MX’er SYSTEM
Install the shift cam into the left crankcase.
Install the transmission fork to the main shaft
gear and install the transmission fork guide
pin into the shift cam groove.
Install the transmission fork shaft into the left
crankcase.
Install the change gear shaft by aligning the
punch mark between with the punch mark of
the shift cam gear.
Install shift cam stopper, spring, washer and
plug and tighten the plug.
Transmission Fork
Shift ca
m
Transmission Fork Shaf
t
Mark
Plug