12. FRONT WHEEL/FRONT BRAKE/FRONT
SUSPENSION/STEERING SYSTEM
12-19
MX’er SYSTEM
Apply the grease onto the end of the throttle
cable and end of the brake cable.
Refer to the “TOE-IN ADJUSTMENT”
section in the CHAPTER 3 to adjust toe-in.
Refer to the “FRONT BRAKE
ADJUSTMENT” section in the CHAPTER
3 to adjust front brake.
Refer to the “REAR BRAKE
ADJUSTMENT” section in the CHAPTER
3 to adjust rear brake.
• Be sure the upper handlebar holder
mark face to front.
• Fist tighten the bolts on the front side
of the handlebar holder, and then
tighten the bolts on the rear side.
To Next Page
Loading...
