Using Various Functions > Functions
334
[4 in 1]
Layout
Border Line
Original Orientation
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Layout image (2 in 1)
[Left to Right/Top to Bottom]
[Right to Left/Bottom to Top]
Layout image (4 in 1)
[Right then Down]
Value Description
[Right then Down], [Left then
Down], [Down then Right], [Down
then Left]
Select the page layout of scanned originals.
Value Description
[None], [Solid Line], [Dotted Line],
[Positioning Mark]
Select the boundary line type.
Value Description
[Top Edge on Top], [Top Edge on
Left], [Auto]
*1
Select the orientation of the original document top edge to scan correct
direction.
Select the orientation of the original from [Top Edge on Top] or [Top
Edge on Left].
To Next Page
Loading...
