Using Various Functions > Functions
365
Value: [SHA-1], [SHA-256], [SHA-384], [SHA-512]
NOTE
This function is displayed when Digital Signature is set to [Specify Each Job] or [On].
Password Confirmation on Signature Permission
Select whether to confirm password when setting digital signature.
Value: [On], [Off]
NOTE
This function is displayed when Digital Signature is set to [Specify Each Job].
[Password]
Set a password required for setting digital signature. Enter a new security password 6 to 16
alphanumeric characters and symbols.
NOTE
This function is displayed when "Password Confirmation on Signature Permission" is set to [On].
3 Select [OK].
4
Display the screen.
1 [Home] key > [Send] > [Org./SendData Format] > [File Format]
5
Configure the settings.
1 Select [PDF] or [High Comp. PDF] as a file format.
2 From "Digital Signature", select [On] > [OK] in order.
NOTE
This function is displayed only when [Specify Each Job] is set in step 3-2.
If "Password Confirmation on Signature Permission" is set to [On], a password input screen appears.
Enter a password set in the system menu.
➡ Password (page 441)
6
Press the [Start] key.
To Next Page
Loading...
