System Menu > DeviceSettings
407
Item Description
[Weekly Timer] Select whether to use Weekly Timer.
Value: Off, On
[Schedule] Specify the time for each day of the week at which the machine enters
Sleep mode and recovers.
[Retry] Set the number of retry to switch the machine into Sleep mode.
Value: [Not Retry], [Limited Retries], [Unlimited Retries]
NOTE
• If [Limited Retries] is selected, set the number of retries. The setting
range is 0 to 10.
• If [Unlimited Retries] is selected, retry is performed until the machine
enters Sleep mode.
[Retry Interval] Set the retry interval.
Use [-] / [+] to enter a number.
Value: 10 to 60 seconds (in 10 second increments)
[Power Off Timer] Select whether to turn off the power automatically after a period of
inactivity.
Value: [1 hour], [2 hours], [3 hours], [4 hours], [5 hours], [6 hours], [9
hours], [12 hours], [1 day], [2 days], [3 days], [4 days], [5 days], [6 days],
[1 week]
[Power Off Rule] Select whether or not the machine enters Power Off mode for the
following function. Select [On] to set the Power Off mode.
• Network
• Fax
• USB Cable
• USB HOST
• Application
• NIC
• Remote Diagnostics
Value: Off, On
NOTE
• Even when any of the functions is set to [On], if either [Fax] or [NIC] is
set to [Off], the machine does not enter Power Off Mode.
• Even when [Network] or [USB Cable] is set to [Off], if the machine does
not communicate with the other devices, the machine will enter Power
Off Mode.
• [Fax] is displayed only when the optional FAX Kit is installed.
• [NIC] is displayed when the optional Network Interface Kit or Wireless
Network Interface Kit is installed.
To Next Page
Loading...
