System Menu > DeviceSettings
408
[Energy Saver Recovery Level]
Select the method of recovery from energy saver.
Value
[Full Recovery]
This mode enables the use of all functions immediately. However, this mode saves less energy.
[Normal Recovery]
In this mode, you can select the method from the following: enabling the use of all functions immediately or
enabling the use of desired functions only. If you want to use all functions immediately, select the [Energy
Saver] key to execute recovery.
[Power Saving Recovery]
This mode enables the use of the functions that you wish to use only. This is the most energy-efficient mode.
[Ping Timeout]
Set the time until timeout occurs when [Ping] is executed in "NetworkSettings".
Value: 1 to 30 seconds (in 1 second increments)
To Next Page
Loading...
