System Menu > NetworkSettings
470
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in IP Address.
• After changing the setting, restart the network or turn the machine OFF and then ON.
[IPv6 Settings]
Set up TCP/IP (IPv6) to connect to the network. This setting is available when TCP/IP is On.
DNS Server Address Set the IP address of DNS (Domain Name System) server.
Value: [Use DNS Server from DHCP], [Use the following DNS Server]
NOTE
When [Use the following DNS Server] is selected, enter the DNS server IP
address into "DNS Server (Primary)" and "DNS Server (Secondary)".
DNS over TLS Set whether to connect to a DNS server during communication
protected by TLS.
Value: [Off], [On], [Auto]
Item Description
IPv6 Select whether to use IPv6.
Value: Off, On
NOTE
Selecting ON displays IP address in "IPAddr.(LinkLocal)" after restarting
the network.
Item Description
To Next Page
Loading...
