EasyManua.ls Logo

Kyocera 458ci - Page 481

Kyocera 458ci
790 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Menu > NetworkSettings
471
Manual Setting Manually specify the IP address, prefix length, and gateway address of
TCP/IP (IPv6).
Value
IP Address (Manual)
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
Prefix Length
0 to 128
Default Gateway
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
This function is displayed when "IPv6" is set to On.
To enter "Default Gateway", set "RA (Stateless)" to Off.
RA (Stateless) Select whether to use RA (Stateless).
Value: Off, On
NOTE
This function is displayed when "IPv6" is set to On.
Selecting On displays IP address in [IP Address (Stateless)] after
restarting the network.
DHCP Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
This function is displayed when "IPv6" is set to On.
Selecting ON displays IP address in IP Address (Stateful) after
restarting the network.
DNS Server Address Set the IP address of DNS (Domain Name System) server.
Value: [Use DNS Server from DHCP], [Use the following DNS Server]
NOTE
When [Use the following DNS Server] is selected, enter the DNS server IP
address into "DNS Server (Primary)" and "DNS Server (Secondary)".
Item Description

Table of Contents

Related product manuals