Kyocera 458ci - Page 90

Installing and Setting up the Machine > Default Settings of the Machine
80
Wireless LAN Connection by Wi-Fi Direct Using Wi-Fi Setup Tool
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to the machine, connect the computer or mobile
device with the machine locally.
To use Wi-Fi Direct, confirm that the Wi-Fi Direct is enabled (Wi-Fi Direct is set to ON) and Restart Network from
the operation panel, before your computer will be connected to this machine with Wi-Fi Direct.
NOTE
Configure the settings on the operation panel if your computer supports WPS.
➡ Wi-Fi Settings (page 463)
➡ Wireless Network (page 481)
1
Display the screen.
[System Menu/Counter] key > [NetworkSettings] > "Network Settings" [Wi-Fi Direct Settings]
2
Configure the settings.
[Wi-Fi Direct]: On > [Close]
3
Restart the network.
[System Menu/Counter] key > [NetworkSettings] > "Network Settings"[Restart Network] > [Restart]
4
Connect a computer or a mobile device with the machine.
➡ Setting Wi-Fi Direct (page 82)
5
Launch the Wi-Fi Setup Tool.
1 Launch your Web browser.
2 Enter URL to the browser’s address bar or location bar.
Triumph-Adler
https://www.triumph-adler.com/ta-en-de/customer-service/download-centre
https://www.triumph-adler.com/ta-de-de/kundendienst/download-center
UTAX
https://www.utax.com/en-de/hardware/office-printer-and-mfp/download-centre
https://www.utax.com/de-de/hardware/buerodrucker-und-mfp/download-center
3 Follow the guidance on the screen to download the Wi-Fi Setup Tool.