Installing and Setting up the Machine > Default Settings of the Machine
86
Sleep Rules
You can set whether sleep mode operates for each function. When the machine enters sleep mode, the ID card
cannot be recognized.
For more information on Sleep Rules settings, refer to the following:
➡ Date/Time (page 405)
Energy Saver Recovery Level
This machine can reduce power consumption when recovering from Energy Saver Mode. For Energy Saver
Recovery Level, [Full Recovery], [Normal Recovery] or [Power Saving Recovery] can be selected. The factory default
is [Normal Recovery].
For more information on Energy Saver Mode settings, refer to the following:
➡ Configuring Settings Quick Setup Wizard (page 89)
➡ Energy Saver Recovery Level (page 408)
Weekly Timer Settings
Set the machine to automatically sleep and wake up at times specified for each day.
For more information on Weekly Timer Settings, refer to the following:
➡ Configuring Settings Quick Setup Wizard (page 89)
➡ Weekly Timer Settings (page 406)
Power Off Timer
If the machine is not used while in sleep mode, the power automatically turns off. The Power Off Timer is used to
set the time until the power turns off.
The factory setting for the time until the power turns off: 3 days
➡ Energy Saver/Timer (page 406)
To Next Page
Loading...
