4-31
Printing from PC > Job Box Setting
Job Box Setting
Configures settings for Job Box.
1
Display the screen.
[Document Box] key > [ ] [ ] key > [Job Box Setting] > [OK] key
2
Configure the settings.
The available settings are shown below.
If the default screen of the box is set to a Custom Box, display the Job Box screen.
[Document Box] key > [Back] key > [ ] [īą] key > [Job Box] > [OK] key
Item Description
Quick Copy Jobs To maintain free space on the box, you can set the maximum number of stored jobs.
Value: number between 0 and 300
When 0 is set, Quick Copy cannot be used.
JobRet. Deletion This setting specifies that documents, such as Private Printing, Quick Copying, or Proof
and Hold Printing, saved temporarily in the job box are automatically deleted after they
have been saved for a set time.
Value: Off, 1 hour, 4 hours, 1 day, 1 week
This function is valid for documents saved after the function is set. Regardless of this
function setting, temporary documents are deleted when the main power switch is
turned off.
DelPIN at PwrOff Configures whether to delete the jobs retained in the PIN Print box when the power is
turned off.
Value: Off, On
Storage Media Select which storage media to use.
Value: SSD, SD Card
This setting is not displayed if the optional SSD or SD card is not installed.
To Next Page
Loading...
Need help?
General
